Order Online or Call 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055 Fascias Soffits Cladding Polycarbonate Guttering Corrugated Glazing Bars Domes Conservatories Acrylic Canopies Shutters Ceilings Screws Silicon Glue Foam The Range Is Endless Corrugated Plastic Roof Sheets PVC, STEEL & GRP Shop For Polycarbonate uPVC Fascias Soffits Cladding Corrugated Roofing Sheets And Accessories | Corrugated Plastic Roof Sheets PVC, STEEL & GRP A selection of steel corrugated roofing sheets. In Traditional Box profile in a range of stylish colours or the new MAXI-Tile sheet designed to imitate traditional tile roofs. These long lasting sheets have been galvanised and the coated with either Polyester or PVC to give it double the protection. Ideal for replacing that old asbestos roof or for new build projects. | These traditional style plastic corrugated wave form sheets come in a range of thickness, lengths and sizes. You wont get good quality PVC corrugated sheets at such low prices from you superstores. | Ideal for garden and commercial buildings. Smooth, soft sheen surfaced sheets that are quick & easy to install with a long life. These plastic corrugated roof sheets are avaliable in Grey, Dark Green, Terracotta, Clear & Natural (pale blue translucent) | These fibre glass roof sheets have strength and the durability to out last Steel, PVC or Fibre Roofing materials. More commonly used as roof lights to allow obscured light into buildings. These sheets are avaliable in Class 1 & Class 3 grades and relevant fire safety codes. Class O is avaliable to order. | For all the sheets listed, including "J" & Scaffold Bolts, Flashing, Eaves Fillers, Plastic Caps......... Can not find what your looking for then try searching by part number or Clicking This Link for a full list of sections where products to be found Site Map For All Products | |
Important NoticeAll Plastic Building Materials should be kept flat during transport and storage. If the items are to be stacked then care must be taken not to overload the stack so as to crush the lower products, it it extremely important that all materials are covered with a LIGHT PROOF sheet to prevent direct sunlight over heating the interior of the stack. |  | Conversions UtilityPlease Note This Utility Is For Guidance Only. C & A Building Plastics Cannot Be Held Responsible For Any Inaccuracies.
|
|
| Metric To Imperial Imperial To Metric |
|
|
| |
Best Selling Items300mm Deeplas Corner Cover £1.75 are used for joining the ends, finishing internal & external corners. Extra long caps are avaliable for box ends and fascia boards wider than 300mm
find out more | | 300mm Deeplas Centre Joint £1.74 are used for joining the ends, finishing internal & external corners. Extra long caps are avaliable for box ends and fascia boards wider than 300mm
find out more | | uPVC Solvent Cleaner £3.50 Designed to remove marks from newly installed PVCu window frames and fascia sections, the cleaner will restore an ‘As new’ finish to older installations and plastic garden furniture, etc.
find out more | | Deeplas End Cap £1.16 are used for joining the ends, finishing internal & external corners. Extra long caps are avaliable for box ends and fascia boards wider than 300mm
find out more | | White Premier Silicone £2.30 Premier 450 Silicon Sealant is specially recommended for polycarbonate sheets, this product dries quickly to a flexible rubber seal, and will bond to most building substraights.
Sticks Best To - Timber, Brick, Stone, PVCu, Concrete and Metal
find out more | | 4M Half Round Gutter £6.40 Premier Guttering 112mm Profile With A Choice of Black, Brown or White.
find out more | | 16oz White Rubber Mallet £2.93 A semi hard head that has been designed not to mark or discolour surfaces fitted to a wooden handle.
find out more | | 150mm x 5M Deeplas Cappit Board £9.39 Capping Boards are available in 2.5 & 5M lengths with widths of 150mm, 175mm, 200mm, 230mm, 250mm, 275mm, 300mm & 400mm.These boards are used for over capping existing wooden fascia, providing the timbers are in a good state or repair, boards are usually pinned over the top using Polytop Pins. Some sites offering 7 & 9mm cappit boards advise that they are for use as replacement fascia, we advise all our customer that cappit board is for over capping the existing wooden fascia. These boards will bow when fixed directly to the roof rafters. Always use 16 or 17mm boards for new installations.
find out more | | 50/200 Glue & Activator Kit £7.04 Get both the glue and the activator at a reduced price
find out more | | 150mm x 5M Deeplas Fascia Board £19.96 Fascia Boards are available in 2.5 & 5M lengths and widths of 150mm, 175mm, 200mm, 225mm, 250mm, 300mm & 400mm. Used to replace existing wooden fascia, Rafters & joists must be in a good state or repair before fitting uPVC fascia. The boards are usually fixed in place using Stainless Steel Polytop Nails. We recommend that you use 65mm nails
find out more | | 40mm White Polytop Pins Box of 250 £10.48 Stainless Steel Polytop Pins Ideal For Fixing Cappit, Fascia, Soffit and Cladding. These pins are made commonly used throughout the industry. Availible in White. Dark Brown, Caramel & Black. The coloured pins are the best match for the woodgrain materials.
find out more | | 40mm White Polytop Pins Packs of 25 £1.47 Stainless Steel Polytop Pins Ideal For Fixing Cappit, Fascia, Soffit and Cladding. These pins are made commonly used throughout the industry. Availible in White. Dark Brown, Caramel & Black. The coloured pins are the best match for the woodgrain materials.
find out more | |
Shop For Polycarbonate uPVC Fascias Soffits Cladding Corrugated Roofing Sheets And Accessories | Corrugated Plastic Roof Sheets PVC, STEEL & GRP C & A Supplies Ltd, Bidder Street, London E16 4ST Tel 0845 165 165 8 or 0207 474 0474 Fax 0207 474 5055 Or Send Us An Email using the contact us link Site Designed By D.Beaumont Kent Branch :- C & A Building Plastics, Gillingham BP, Kent ME8 0QN Enquires in KENT AREA ONLY Tel 01634 374444 Fax 01634 366644 |
